BURN - Dental Casting Resin About
Works with any DLP or LED/LCD 3d printer
Vitaresin Burn is a special 100% ash-free castable resin formulated for excellent quality and fast burning in dental direct casting.
- Burning 100% ash-free for dental casting and fast burning.
- Suitable for dental casting.
- Requires minimal post-casting treatment due to excellent casting quality
- No investment cracks or expansion
- Compatible with dental burnout cycle and dental investments.
- Suitable for 3D printers with 365nm/385nm and 405nm wavelength
This special resin can be used for all types of DLP or LED curing 3d printers. It has fast curing properties depending on the 3d printer used.
- Fast curing properties for fast printing
Hit
Provides accurate printing with details and can be printed below 10 microns and provides 0.1 mm thickness
Safe and Odourless
Safe to use. No hazardous solvents or dangerous monomers
Compatible with 365,385nm and 405nm
You can use this resin with any printer with 365-385nm or 405nm light source
100% Ashless, Castable
Specially produced for direct casting. Evaporates with heat without leaving ash
Easy to Cast
Easy casting with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others
E-Max Printing
Suitable for E-Max press using any investment
.png)
Excellent Metal Casting
Easily cast metal without damaging the investment
No Curing Required
No post UV curing is required after printing. Just wash and use
Our Apps
Work Flow Chart
Özellikler
| Material Feature | Value | Standard |
|---|---|---|
| Tensile Strength | 14.4 MPa | ASTM D638 |
| Flexural Strength | 20.7 MPa | ASTM D790-02 |
| Bending Modulus | 472 MPa | ASTM D790-02 |
| Bending Modulus | 70.5 | ASTM D2240 |
| Density | 1.1 g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 490 - 510 mPa.s at 23oC | DIN 53211-4 |
| Color | Green |
Vitaresin Post-Burn Treatment
1- Washing
- After printing is complete, wash the part attached to the build plate with ethyl alcohol (>90%) or isopropyl alcohol (>90%) for 5 minutes.
- Ensure that the alcohol completely covers the part during washing.
- Do not over wash, it may cause distortion in the dimensions of the part.
2- Drying
- Use an air compressor to dry the washed part.
- Make sure the part is dry and the uncured resin is completely removed.
- If there is still uncured resin left on the part, wash with fresh alcohol and dry again.
3- Part Disassembly
- Remove the printed part from the build plate using a scraping tool, being very careful not to damage your hand and the model.
- Store the Vitaresin Burn bottle in a dark and moisture-free place at room temperature (20-24 °C).
Always wear gloves during finishing!
About Primer Resin Strong Adhesion
Vitaresin is a resin with very strong adhesion properties and designed to be used for all LCD, DLP and SLA technology printers with adhesion problems.