DARK Sharp Castable Resin About
Works with any DLP or LED/LCD 3d printer
Vitaresin Dark has been specially developed for direct casting of highly detailed jewellery. It provides excellent casting quality combined with very sharp printing capabilities and easily adjustable stones.
- Very high precision and accuracy
- Excellent printing properties with sharp details suitable for micro-pave bifurcated jewellery, engraving, highly detailed figures or filigree
- Easy to place the stones directly on the printed model before casting
- Create lighter jewellery with perfect precision
- 100% ash-free combustion, perfect for direct casting
- Use of the standard candle burning cycle
- No need for curing after printing
- Suitable for 3D printers with 365nm/385nm and 405nm wavelength
This special resin can be used for all types of DLP or LED curing 3d printers. It has fast curing properties depending on the 3d printer used.
- Fast curing properties for fast printing
- Very precise printing features also suitable for Solus 3d printer
Hit
Provides accurate printing with details and can be printed below 10 microns and provides 0.1 mm thickness
Liquid
This resin has a low viscosity. It is easy to clean and provides high lubricity after cleaning
Safe and Odourless
Safe to use. No hazardous solvents or dangerous monomers
Compatible with 365,385nm and 405nm
You can use this resin with any printer with 365-385nm or 405nm light source
100% Ashless, Castable
Specially produced for direct casting. Evaporates with heat without leaving ash
Easy to Cast
Easy casting with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others
Easily Adjustable Stones
Specially designed for easy placement of stones on the printed pattern
Sharp Details
Excellent printing characteristics with sharp details suitable for micro-pave bifurcated jewellery, engraving, highly detailed figures
Our Apps
Work Flow Chart
Özellikler
| Material Feature | Value | Standard |
|---|---|---|
| Tensile Strength | 10 MPa | ASTM D638 |
| Flexural Strength | 12.8 MPa | ASTM D790-02 |
| Bending Modulus | 281.3 MPa | ASTM D790-02 |
| Density | 1.07 g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 550 - 580 mPa.s at 23oC | DIN 53211-4 |
| Color | Black |
Vitaresin Dark's Post-Processing
1- Washing
- After printing is complete, wash the part attached to the build plate with ethyl alcohol (>90%) or isopropyl alcohol (>90%) for 5 minutes.
- When washing, make sure that the alcohol completely covers the part.
- Use a brush to remove uncured resin if necessary.
- Do not over wash, it may cause distortion in the dimensions of the part.
2- Drying
- Use an air compressor to dry the washed part.
- Make sure the part is dry and the uncured resin is completely removed.
- If there is still uncured resin left on the part, wash with fresh alcohol and dry again.
3- Part Disassembly
- Remove the printed part from the build plate using an engraving tool, being very careful not to damage your hand and the model.
- Store the Vitaresin Dark bottle in a dark and moisture-free place at room temperature (20-24 °C).
About Primer Resin Strong Adhesion
Vitaresin is a resin with very strong adhesion properties and designed to be used for all LCD, DLP and SLA technology printers with adhesion problems.