RTV - Resin for Silicone Moulding About
Works with any DLP or LED/LCD 3d printer
Vitaresin RTV resin is a special 3d printer resin designed to take RTV (Room Temperatur Vulcanized) liquid silicone moulds.
This special resin allows to have very sharp and accurate details. You can also harden this resin afterwards and make it harder to polish before taking the RTV liquid mould.
- Easily get liquid RTV mould from printed model
- Excellent print quality for details
- Smooth surface that can be post-polished or post-cured
- High dimensional accuracy and no deformation over time
This special resin can be used for all types of DLP or LED curing 3d printers. It has fast curing properties depending on the 3d printer used.
- Fast curing properties for fast printing
- Suitable for 3D printers with 365nm/385nm and 405nm wavelength
Hit
Provides accurate printing with details and can be printed below 10 microns and provides 0.1 mm thickness
Liquid
This resin has a low viscosity. It is easy to clean and provides high lubricity after cleaning
Safe and Odourless
Safe to use. No hazardous solvents or dangerous monomers
Get EAISLY RTV Mould
Designed to take RTV (Room Temperatur Vulcanized) liquid silicone moulds
Our Apps
Work Flow Chart
Özellikler
| Material Feature | Value | Standard |
|---|---|---|
| Tensile Strength | Green:23.1 MPa, Tedavi Sonrası:19.3 MPa | ASTM D638 |
| Flexural Strength | Green:59.8 MPa, Tedavi Sonrası:37.09 MPa | ASTM D790-02 |
| Bending Modulus | Green:2002.9 MPa, Tedavi Sonrası:947.6 MPa | ASTM D790-02 |
| Bending Modulus | Green:78, Tedavi Sonrası:80.4 | ASTM D2240 |
| Density | 1.01 g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 500 - 530 mPa.s at 23oC | DIN 53211-4 |
| Color | Pink |
Post-processing of VitaResin RTV
1- Washing
- After printing is complete, wash the part attached to the build plate with ethyl alcohol (>90%) or isopropyl alcohol (>90%) for 5 minutes.
- When washing, make sure that the alcohol completely covers the part.
- Use a brush to remove uncured resin if necessary.
- Do not over wash, it may cause distortion in the dimensions of the part.
2- Drying
- Use an air compressor to dry the washed part.
- Make sure the part is dry and the uncured resin is completely removed.
- If there is still uncured resin left on the part, wash with fresh alcohol and dry again.
3- Part Disassembly
- Remove the printed part from the build plate using a scraping tool, being very careful not to damage your hand and the model.
- Store the Vitaresin RTV bottle in a dark and moisture-free place at room temperature (20-24 °C).
About Primer Resin Strong Adhesion
Vitaresin is a resin with very strong adhesion properties and designed to be used for all LCD, DLP and SLA technology printers with adhesion problems.