Yellow Jewellery Castable Resin About
Works with any DLP or LED/LCD 3d printer
Vitaresin Yellow has been specially developed for direct casting of highly detailed jewellery. It is especially perfect for producing the details of moving chain patterns.
Characteristics of Yellow:
- Very high precision and accuracy
- Particularly suitable for chain models
- Excellent printing properties with sharp details suitable for micro-pave bifurcated jewellery, engraving, highly detailed figures or filigree
- Easy to place the stones directly on the printed model before casting
- Create lighter jewellery with perfect precision
- 100% ash-free combustion, perfect for direct casting
- Use of the standard candle burning cycle
- No need for curing after printing
- Suitable for 3D printers with 365nm/385nm and 405nm wavelength
Hit
Provides accurate printing with details and can be printed below 10 microns and provides 0.1 mm thickness
Liquid
This resin has a low viscosity. It is easy to clean and provides high lubricity after cleaning
Safe and Odourless
Safe to use. No hazardous solvents or dangerous monomers
Compatible with 365,385nm and 405nm
You can use this resin with any printer with 365-385nm or 405nm light source
100% Ashless, Castable
Specially produced for direct casting. Evaporates with heat without leaving ash
Easy to Cast
Easy casting with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others
No Curing Required
No post UV curing is required after printing. Just wash and use
Our Apps
Work Flow Chart
Özellikler
| Material Feature | Value | Standard |
|---|---|---|
| Tensile Strength | 22 MPa | ASTM D638 |
| Flexural Strength | 15.4 MPa | ASTM D790-02 |
| Bending Modulus | 327 MPa | ASTM D790-02 |
| Bending Modulus | 70.2 D | ASTM D2240 |
| Density | 1.05g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 650 - 700 mPa.s at 23oC | DIN 53211-4 |
| Color | Yellow |
About Primer Resin Strong Adhesion
Vitaresin is a resin with very strong adhesion properties and designed to be used for all LCD, DLP and SLA technology printers with adhesion problems.